USB
  CP210x Linux Driver

Post New Topic  Post A Reply
profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone! next newest topic | next oldest topic
Author Topic:   CP210x Linux Driver
egawtry
Member 		posted April 11, 2006 03:21 PM     Click Here to See the Profile for egawtry   Click Here to Email egawtry     Edit/Delete Message
Anyone have something newer than the RH9 driver for the CP210x? It doesn't work with RH13 (Fedora 4).

Thanks,
-Erik

IP: Logged

egawtry
Member 		posted April 15, 2006 10:58 PM     Click Here to See the Profile for egawtry   Click Here to Email egawtry     Edit/Delete Message
I notice that there appears to be a CP2101 driver built into the Fedora 4 kernel. Does anyone know how to access the port? I can't seem to access it with ttyS0-ttyS20 - I tried everything in-between.

-Erik

IP: Logged

Tsuneo
Member 		posted April 16, 2006 04:06 AM     Click Here to See the Profile for Tsuneo   Click Here to Email Tsuneo     Edit/Delete Message
The driver built in the distribution is this one, not the SiLabs'.

"CP2101 Linux Driver" by Craig Shelley
http://www.microtron.org.uk/~craig/Projects/CP2101Driver/

See this link to know why this situation occurs.
"cp2101 usb protocol???"

Tsuneo

[This message has been edited by Tsuneo (edited April 16, 2006).]

IP: Logged

egawtry
Member 		posted April 16, 2006 11:57 AM     Click Here to See the Profile for egawtry   Click Here to Email egawtry     Edit/Delete Message
I will dig through the code and see if I can figure out what the driver was mounted on.

Thanks,
-Erik

IP: Logged

All times are CT (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | MCU User Forum

Have you seen our MCU Knowledge Base?


Ultimate Bulletin Board 5.47b