|
 USB
 USB Linux driver
|
 UBBFriend: Email This Page to Someone! |
next newest topic | next oldest topic |
| Author | Topic: USB Linux driver |
|
maximil New Member |
posted March 06, 2006 08:00 AM
  
Hello, we need to have the source code of this driver or have already a pre-compiled Linux 2.4 driver? We want to integrated on embedded devices, is it possible? Thank you in advance IP: Logged |
|
Tsuneo Member |
posted March 06, 2006 08:58 AM
CP210x As your target is the embedded Linux, you need source code. - "CP2101 Linux Driver" by Craig Shelley - Ask the SiLabs 'source code' to SiLabs (mcutools@silabs.com). You may have an interest on the current situation of the Linux driver, discussed in this link. 'F32x and 'F34x, Tsuneo [This message has been edited by Tsuneo (edited March 06, 2006).] IP: Logged |
|
erikm Member |
posted March 06, 2006 09:04 AM
we need to have the source code of this driver or have already a pre-compiled Linux 2.4 driver? We want to integrated on embedded devices, is it possible? If you are talking about "embedded linux" the answer is yes, but you are in the wrong place. SILabs makes no chip capable of handling the multimegabytes of code embedded Linux require. Erik IP: Logged |
|
Tsuneo Member |
posted March 06, 2006 09:20 AM
Anyway, I cannot imagine the situation, an embedded Linux and an USB-serial chip. Why not use serial directly?  Tsuneo IP: Logged |
All times are CT (US) | next newest topic | next oldest topic |
  |
|
Contact Us | MCU User Forum
Have you seen our MCU Knowledge Base?
Ultimate Bulletin Board 5.47b