|
 CPU/Crossbar/GPIO/JTAG/Package
 problem in program
|
 UBBFriend: Email This Page to Someone! |
next newest topic | next oldest topic |
| Author | Topic: problem in program |
|
gvs New Member |
posted August 12, 2010 05:12 AM
  
Hi I am facing a problem in my program.I am doing this in C8051F064ek kit. I attached the whole project file. When I apply a 3v pulse 1Hz signal to an external interrupt INT0 on Port 0.2 .and I making Port 1.6 as output and making the led to toggle, but toggling is random, which should not be according to program. I want to generate equal time period in ON and OFF of LED (Toggle) On P1.6.I want to know where the problem in the program so that toggling of the output should be equal time period in ON and off. please provide any solution Thanks and regards Srinivasa IP: Logged |
|
erikm Member |
posted August 12, 2010 08:17 AM
attached the whole project file. to what? where? DO NOT "attach the whole project file" Include the smallest possible commented and indented code snippet that show your problem Erik IP: Logged |
All times are CT (US) | next newest topic | next oldest topic |
  |
|
Contact Us | MCU User Forum
Have you seen our MCU Knowledge Base?
Ultimate Bulletin Board 5.47b