|
 MCU User Forum
 Program code memory exceeds 64K
|
 UBBFriend: Email This Page to Someone! |
next newest topic | next oldest topic |
| Author | Topic: Program code memory exceeds 64K |
|
zalacn New Member |
posted August 20, 2010 05:52 AM
  
Hi, Just now I am working with C8051F120 Mocrocontroller. As you know that this MCU support up to 128K Program code memory. But As my program code exceeds 64K it shows following error. ERROR: SEGMENT LIMIT EXCEEDED I also try using Code Banking according to Application Note AN130.But there is no result. Thank you IP: Logged |
|
Tsuneo Member |
posted August 26, 2010 12:22 AM
> I also try using Code Banking according to Application Note AN130.But there is no result. Sound like you have failed to apply AN130, which should work. Tsuneo IP: Logged |
|
erikm Member |
posted August 26, 2010 06:33 AM
But there is no result nobody can help you with that. You must post the 'result' there must be some 'result' an error message, a full build, but no run .... Erik [This message has been edited by erikm (edited August 26, 2010).] IP: Logged |
All times are CT (US) | next newest topic | next oldest topic |
  |
|
Contact Us | MCU User Forum
Have you seen our MCU Knowledge Base?
Ultimate Bulletin Board 5.47b